SPECIFICATIONS AND DETAILS SECURITY LEVEL 4 STEEL NARROWLINE - TOP HINGED or FIXED High Strength Steel Tubular Mainframe Life Safety Emergency Release Heavy Duty Piano Hinge Stainless Steel Wire Cloth Fixed or Operable Design Automated Powder Coat Finish System 5 Standard Colors Custom Colors Available SECURITY LEVEL 5 STEEL NARROWLINE SCREEN High Strength Tubular Steel Mainframe No Exposed Fasteners Narrow Sightline 2 7/16" HUD Certified "Heavy Screen" 180 Degree Hem on the Wire Cloth Life Safety Emergency Release Internal Tensioned Aluminum Subframe with Continuous Insect Strip Concealed 13 gauge Steel Hinges Automated Powder Coat Finish System 5 Standard Colors Custom Colors Available SECUITY LEVEL 6 ALUMINUM or STEEL VAN-GUARD ® SERIES Heavy Extruded Aluminum Frames 13 gauge Steel Frames Continuously Welded Corners on the Mainframe and Subframe 90 Degree Bend on the Wire Cloth Life Safety Emergency Release Subframe with Insect Shield Standard Bitt Key Lock Available Concealed 13 gauge Steel Hinges Automated Powder Coat Finish System 5 Standard Colors Custom Colors Available SECURITY LEVEL 9 STEEL OPERATING VANTAGE WALL® 12 gauge Galvanized Steel Frames Continuously Welded Frame Corners 1/4" Woven Rod with 2" Open Space 12 gauge Steel Perforated Panel Option Rods Welded to Frame Life Safety Emergency Release Standard Bitt Key Lock Available Concealed 13 gauge Steel Hinges Automated Powder Coat Finish System 5 Standard Colors Available Custom Colors Available KANE AUTOMATED POWDER COAT FINISH SYSTEM Polyester Powder Coating - Kane's commitment to engineering excellence includes industrial thermoplastic polyester powder coatings. Chosen for their superior appearance and performance, these coatings meet Kane's high standards for quality. Five Stock Colors - Kane products are supplied to you in your choice of five stock semi-gloss colors. Custom color matching is also available at additional cost. Coatings Are Electrostatically Applied To Prepared Surfaces - Our products are prepared for coating in a five-step bonderizing process. The parts are chemically cleaned and rinsed to remove surface contamination, then given a pre-treatment etching and phosphatizing bath for added corrosion resistance. This is followed by an additional rinse and a sealer coat. Upon completion of this procedure, the parts receive an electrostatically applied polyester powder coat to provide consistent coverage and assure surface durability. Hard, Tough, Mar-Resistant Finish - After the powder coating is applied, the parts are baked for 20 minutes at 375 degrees. The resulting finish provides excellent resistance to corrosion, pitting and scratching